.75OLIVER’SMANUAL22"REARDISCHARGEROTARYMOWERSModel Numbers 112-340A 112-340-300Important: >" '-'Ji ?Read Safety Rules and\vInst
MAINTENANCECUTTING BLADEA. Removal for Sharpening or Replacement) WARNING \Be sure to disconnect and ground the spark plug wire before work
AIR CLEANERService air cleaner every 25 hours under normai conditions. Clean every few hours under extremely dusty conditions. Poor
NOTEThe use of any accessory on this Rotary Mower other than those manufactured by the mower manufacturer is not recommended.I WARNING }
NOTES13
Model 340NOTEThis instruction manual covers various models and all specifications shown do not necessarily apply to your model. Specifications
Model 340 PARTS LIST FOR MODEL 340 ROTARY MOWER^N0.PARTNO.COLORCODEDESCRIPTIONNEWPARTREF.NO.PARTNO.DESCRIPTIONNEWPART1718-0145Gript38712-0287Hex Nut 1
PARTS INFORMATIONPOWER EQUIPMENT PARTS AND SERVICEParts and service for all MTD manufactured power equipment are available through the authorized
INDEXSafe Operation Practices...3Assembiy...
fWARNINGTo reduce the potential for any injury, comply with the following safety instructions. Failure to comply with the instructions
FIGURE 1.FIGURE 2.ASSEMBLYINSTRUCTIONSNOTEThis unit is shipped WITHOUT GASOLINE or OIL. After assembly, see operating section of this m
-B. Units with Folding Handle—Secure upper handle with two curved carriage bolts (A) and hand knobs (B) as shown in figure 4. The
LowerFrameGrass Catcher Assembly-1. Join the upper frame and lower assembly as shown in figure 7.frameFIGURE 7.PlasticChannelsFIGURE 8.Grass Cat
The grass catcher frame will snap into place, -------secured by the lock lever. See figure 10.To remove the grass catcher, unhook the lock leve
FIGURE 12.3. Fill fuel tank, using clean, fresh leaded regular grade automotive gasoline. Fill tank completely.DO NOT MIX OIL WITH GASOL
HANDLE POSITIONThe upper handle can be adjusted to a high or low position. The adjustment is made by removing the two knobs or hex
Comments to this Manuals