Bolens 191-658 User Manual Page 1

Model Nos. 190-658 191-65810 CENTS30" SNOW THROWERiIMITID FROIDXJCTS IlSTC « 5389 west i30th st. • p.o. box 2741 • Cleveland, ohio 441iiFORM NO.

STORAGE1. Drive the tractor as close to the storage area as possible.2. Disconnect the elbow crank and the clutch control rod.3. Disconnect the ada

PARTS LIST FOR SNOW THROWER, MODEL 190-658 & 191-658Ulus.No.PartNo.DESCRIPTION ( )-No. Required Per Assembly16412Assem. — Header Housing (30” RH)

190-658 & 191-658 30" SNOW THROWERMNPRSTUVWX Y? 6sl 3 fwf lol 613i? 2i?481 is»66®M #4®63 , ®7 I ¿001 @19»66- 022 a ®19" oil o22®20 ®50M

190-658 & 191-658 30" SNOW THROWER72 ^" ^3^i6i—-/410213

PRINTED IN U.S.A.

Safety Rules for the Operation of Snow ThrowersBEFORE STARTING:1. Read the instruction manual and safety precautions furnished with your sn

ASSEMBLY INSTRUCTIONS1. Open snow thrower carton.2. A) Remove clutch rodB) Remove cardboard insert 1, 2, & 3.C) Remove bag of parts which is p

6. Remove mowing unit.7. Install new engine pulley. Position 5/16” from end of shaft. Square key must not protrude from the pulley. Secure pulley wi

13. Attach snow blower to tractor by connecting guide arms to the mounting plates (Fig. 2) and lift pivot bar to the mounting plates.

18. Attach clutch rod to clutch extension in the second hole from the front and secure with cotter hair pin. See Fig. 2.19. Insert hook end of stack

ADJUSTMENTSJACK SHAFTPULLEYSETSCREWREMOVE BOLT TO INSTALL SPACER WASHERS(FIG. 7)IV2” O.D. SPACER WASHERSIf the snow thrower pulley and the new

ELBOW AND DEFLECTORIf adjustment becomes necessar) loosen the screw on the right side of the elbow, take up the slack in the cable

CONTROLSThrottle Control — The engine speed is regulated by moving the throttle control. Use a high RPM for maximum snow removal. Kee